Kodak 4400, 4200-KK, 5600-KK, 4600-KK, 5600-J, 4200-J Slide Lift Lever Guage TL-3001 Select

SERVICE MANUAL

SLIDE LIFT LEVER GUAGE TL-3001

SLIDE LIFT

LEVER

SELECT

LEVER (not shown)

A091_0016BCA

A091_0016BA

Adjusting the Focus Light Path - Auto Focus Models

Adjustment Specification

Seat AUTO-FOCUS TARGET SLIDE TL-3002 on the GATE MECHANISM. Use TL-3005 or TL-1165 to bend the AUTO-FOCUS BRACKET ASSEMBLY MIRROR until the image is within the target of the TARGET SLIDE.

Warning

Dangerous Voltage

[1]Disconnect the main power.

[2]Remove the PROJECTION LENS.

[3]Do the removal for the LOWER HOUSING ASSEMBLY.

Important

It is necessary to make a FAN COVER TOOL. See the Tools section.

[4]Install the FAN COVER TOOL over the FAN area and the LAMP MODULE.

[5]Energize the projector.

[6]Set the projector to the LOW LAMP position.

[7]Install the AUTO-FOCUS TARGET SLIDE TL-3002 until it is fully seated in the GATE MECHANISM.

[8]Look through the PROJECTION LENS hole and observe the focus light path on the AUTO-FOCUS TARGET SLIDE TL-3002.

[9]Check the position of the image on the AUTO-FOCUS TARGET SLIDE TL-3002.

28 18NOV97 – SM5440-1