Kodak 5600-J, 4400 Adjustment Specification, Adjusting the Cycle Solenoid, Mechanism Assembly BAR

Adjustments

Section 2: Adjustments

Adjustment Specification

Use T-BAR TL-3003 to bend the CYCLE LEVER to adjust the CYCLE SOLENOID.

Adjusting the CYCLE SOLENOID

Warning

Dangerous Voltage

[1]Connect the main power.

Important

1.The CYCLE SOLENOID must operate correctly to do this adjustment.

2.The MECHANISM ASSEMBLY does not have to be removed to do this adjustment.

[2]Do the removal for the LOWER HOUSING ASSEMBLY.

[3]Bend the CYCLE LEVER up or down. Use T-BAR TL-3003.

[4]Energize the projector.

[5]Press the “FORWARD” BUTTON to check for correct operation.

[6]Press the “REVERSE” BUTTON to check for correct operation.

[7]Do the steps above until the FORWARD and REVERSE functions operates correctly.

MECHANISM

ASSEMBLY

T-BAR	CYCLE
TL-3003
	BAR

A091_0007HCA

A091_0007HA

SM5440-1 – 18NOV97 25