SERVICE MANUAL
Important
If you cannot obtain the NULL position after doing the adjustment approximately 3 times, go to the adjustment procedure for the PHOTOCELL.
| light path |
| |
| |
| NULL position |
PROJECTION | TAB |
LENS |
| CLAMP LEVER | ||
| TARGET SLIDE | ||
A091_4031BCA | PAD | ||
A091_4031BA | |||
|
Adjustment Specification
Use
Adjusting the PHOTOCELL
PHOTOCELL
CIRCUIT BOARD
wratten FILTER (2)
Warning
Dangerous Voltage
[1]Disconnect the main power.
[2]Do the removal for the LOWER HOUSING ASSEMBLY.
Important
It is necessary to make a FAN COVER TOOL. See the Tools section.
[3]Install the FAN COVER TOOL over the FAN area and the LAMP MODULE. See the Tools section.
POST (2) | PHOTOCELL | |
MASK | ||
| ||
PHOTOCELL | A091_4032GCA | |
HOUSING | ||
A091_4032GA | ||
|
30 | 18NOV97 – |
