ASSEMBLY
!WARNING!
The cutting equipment of the pruning saw may under no circumstances be connected to another type of hydraulic pump than what it is constructed for.
Connecting the hydraulic hoses
NOTE!
The hydraulic hoses and hydraulic oil tank’s quick- couplings must be clean and free from impurities.
Impurities in the hydraulic oil can result in malfunction of the hydraulic system.
Connect the hydraulic hoses’
1. | Push in the locking |
| sleeve on the quick |
| coupling of the hydrau- |
| lic tank inwards against |
| the tank. |
2. | Thereafter push in the |
| quick coupling of the |
| hydraulic hose into the |
| quick coupling of the oil |
| tank as far as possible. |
3. | Release the locking |
Check that the coupling snaps in correctly.
Lock the coupling by pushing the ring (A) from the tank and then turning it approx. 90°.
Dismantling the hydraulic hoses
Release the extra lock by turning the ring until it snaps back to the hydraulic tank. Push in the lock sleeve and pull out the hose’s
NOTE!
Make sure the protecting plugs are mounted when the quick couplings are not connected.
A |
| sleeve. | |
4. | Make sure the quick | |
| coupling connects | |
| securely. |
|
5. | Carry out the same procedure for the connection of the | |
| other hydraulic hose. | |
Adapter |
| |
The shaft from the pruning |
| |
shears 235 P can also be |
| |
connected to 250 PS by |
| |
means of adapter 503 78 10- |
| |
01. Carefully check that |
| |
both couplings snap in |
| |
correctly. Connect the |
| |
hydraulic hose to the |
| |
adapter. |
| |
A | ||
Check that the lock ring (A) | ||
| ||
has sprung in to the oil |
| |
tank. If not, turn the ring |
| |
until it does. |
| |
Now press the coupling ring |
| |
(B) to the oil tank. Connect |
| |
the hydraulic hose and | B | |
release the coupling ring. | ||
|
Assembly of throttle handle
Snap the throttle handle onto the shaft.
The throttle handle can be moved forwards or backwards to obtain a comfortable working position.
16 – English
