Contents, Note the following before starting, Introduction

Contents
KEY TO SYMBOLS
Symbols	2
CONTENTS
Contents	3
Note the following before starting:	3
INTRODUCTION
Dear Customer,	4
WHAT IS WHAT?
What is what on the brush cutter?	5
What is what on the brush cutter?	6
What is what on the brush cutter?	7
GENERAL SAFETY PRECAUTIONS
Important	8
Personal protective equipment	8
Machine′s safety equipment	9
Cutting equipment	12
ASSEMBLY
Assembling the handlebar and throttle	15
Transport position, handlebar	15
Assembling the cutting equipment	15
Fitting the blade guard/combination guard, grass
blade and ball-bearing-mounted support cup	16
Fitting the blade guard and saw blade	16
Fitting the shredder blade and the shredder blade
guard (355FRM)	17
Fitting other guards and cutting attachments	18
Adjusting the harness and brush cutter	19
Triobalance harness	19
FUEL HANDLING
Fuel safety	21
Fuel	21
Fuelling	22
STARTING AND STOPPING
Check before starting	23
Starting and stopping	23
WORKING TECHNIQUES
General working instructions	25
MAINTENANCE
Carburettor	30
Mufﬂer	31
Cooling system	31
Air ﬁlter	31
Bevel gear	32
Drive shaft	32
Spark plug	32
Winter use	33
Maintenance schedule	35
TECHNICAL DATA

Technical data	36
EC-declaration of conformity	38

•Please read the operator’s manual carefully.

	!	WARNING! Long-term exposure to noise
	!	can result in permanent hearing
		can result in permanent hearing
		impairment. So always use approved
		hearing protection.
	!	WARNING! Under no circumstances may
	!	the design of the machine be modiﬁed
		without the permission of the
		manufacturer. Always use genuine
		accessories. Non-authorized
		modiﬁcations and/or accessories can
		result in serious personal injury or the
		death of the operator or others.
	!	WARNING! A clearing saw, brushcutter
	!	or trimmer can be dangerous if used
		or trimmer can be dangerous if used
		incorrectly or carelessly, and can cause
		serious or fatal injury to the operator or
		others. It is extremely important that you
		read and understand the contents of this
		operator’s manual.

English – 3

Husqvarna 355FRM manual Contents, Note the following before starting, Key To Symbols, Introduction