Husqvarna 355FRM Adjusting the harness and brush cutter, Triobalance harness, Safety release

ASSEMBLY

Adjusting the harness and brush cutter

!	WARNING! When using a brush cutter it
	must always be hooked securely to the
	harness. Otherwise you will be unable to
	control the brush cutter safely and this
	can result in injury to yourself or others.
	Never use a harness with a defective
	quick release.

Triobalance harness

Safety release

Push down the red release lever to release the machine from the harness.

Adjusting the harness

1 Tighten the hip strap so that it sits securely.

2Tighten the chest strap under your left arm so that it fits closely around your body.

3Adjust the shoulder strap to distribute the load evenly across your shoulders. Press downwards on the suspension hook to load the harness.

4Adjust the height of the hanging ring as per the instructions. (Forest clearing)

5If you need to lower the suspension hook, for trimming for example, move the suspension strap (A) to the lower mounting point on the backplate.

6The elastic strap (B) can be tightened to transfer more load from the shoulder straps to the hip strap.

A

B

Correct height

1Forestry clearing

The machine should be supported in a harness when forestry clearing so that the cutting equipment is angled slightly forwards in relation to the ground.

English – 19