ASSEMBLY OF HOPPER BAG
STEP 15 - ASSEMBLE UPPER TUBES
1.Insert the left hand upper hopper tube through the stitched
flaps of the hopper bag, starting at the center cut out in the top of the bag. See fi gures 12, 13 and 14. Repeat for the right hand upper hopper tube.
UPPER HOPPER TUBE (LEFT HAND SHOWN)
CENTER CUT OUT | BAG FLAP |
(START HERE) |
|
STEP 16 - ASSEMBLE LOWER TUBES
4.Assemble the two lower hopper tube together using a plastic plug. See fi gure 15.
PLASTIC PLUG
LOWER
HOPPER
TUBE
Right Left
END HERE 
FIGURE 12
2.Slide the two upper hopper tubes together and line up the center holes as shown in fi gure 13.
UPPER HOPPER TUBES
FIGURE 13
3.Fasten the upper hopper tubes together using a plastic plug. See fi gure 14.
PLASTIC PLUG
FIGURE 14
FIGURE 15
5.Place the assembled lower hopper tubes into the bottom of the hopper bag and then slide the tubes to the back of the bag. See fi gure 16.
6.Attach the ends of the lower hopper tubes to the inside of the upper hopper tubes using two 3/8" x 1/2" clevis pins inserted from the inside, and two small hair cotter pins. See fi gure 16.
UPPER HOPPER
TUBE
SMALL HAIR
COTTER PIN
LOWER HOPPER TUBE
3/8" x 1/2"
CLEVIS PIN
HOPPER BAG
BOTTOM
FIGURE 16
7
