ASSEMBLY
Fitting the trimmer guard and trimmer head (Model 128CD)
SFit the correct trimmer guard (A) for use with the trimmer head. Hook the trimmer guard/combination guard onto the fitting on the shaft and secure with the wing nut (B).
B
A
C
SFit the dust cup (C) on the shaft. The nut must be completely covered by the dust
cup.
SHold the dust cup with a wrench to pre- vent the shaft from rotating.
SScrew the trimmer head (D) onto the shaft.
D
STo dismantle, follow the instructions in the reverse order.
115275126 Rev. 1 9/15/09 |
