TECHNICAL DATA
Technical data
Engine | 128CD | 128LD |
|
| |
Cylinder volume, cu.in./cm3 | 1.7/28 | 1.7/28 |
Cylinder bore, inch/mm | 1.4/35 | 1.4/35 |
Stroke, inch/mm | 1.130/28.7 | 1.130/28.7 |
Idle speed, rpm | ||
Recommended max. speed, rpm | 10,000 | 11,000 |
Speed of output shaft, rpm | 8,000 | 8,000 |
Max. engine output, acc. to ISO 8893, hp/kW | 1.1/0.8 | 1.1/0.8 |
Catalytic converter muffler | Yes | Yes |
Yes | Yes | |
Ignition system |
|
|
Manufacturer/type of ignition system | Walbro/CD | Walbro/CD |
Spark plug | Champion | Champion |
| ||
Electrode gap, inch/mm | 0.024/0.6 | 0.024/0.6 |
Fuel and lubrication system |
|
|
Manufacturer/type of carburetor | Zama | Zama |
Fuel tank capacity, US pint/liter | 0.85/0.4 | 0.85/0.4 |
Weight |
|
|
Weight without fuel, cutting attachment and guard, lbs/kg | 10/4.4 | 11/4.8 |
Sound levels (see note 1) |
|
|
Equivalent sound pressure level at the user’s ear, |
|
|
measured according to ANSI | 94/97 | 94/97 |
Vibration levels |
|
|
Vibration levels at handles, measured according to ANSI |
|
|
|
| |
At idle, left/right handles: | 3/5 | 3/5 |
At max. speed, left/right handles: | 9/8 | 9/8 |
Note 1: Equivalent noise pressure level is calculated as the
NOTE! Noise pressure at the user’s ear and vibration on the handles are measured with all the machine’s approved cutting equipment fitted. The table indicates the highest and lowest values.
These attachments used in combination with the specified powerhead have been evaluated to ANSI
combinations have been evaluated by Underwriter’s Laboratories Inc. (UL) and are conse- | ||
quently UL listed: |
|
|
Model 128CD (3/8 RH arbor shaft thread) |
| |
Approved accessories | Type | Cutting attachment / guard, part. no. |
Trimmer head | TNG7 | 537 41 |
|
|
|
|
| |
Model 128LD (M10 LH arbor shaft thread) |
| |
Approved accessories | Type | Cutting attachment / guard, part. no. |
Trimmer head | T25 | 537 33 |
Plastic blades | Tricut 300 mm | 531 00 |
|
|
|
These accessories used in combination with the specified powerheads have been evaluat- ed to applicable
Attachments | Part. no. |
Edger attachment with shaft | 952 711 607 |
Cultivator attachment with shaft | 952 711 608 |
Blower attachment with shaft | 952 711 609 |
Brushcutter attachment with shaft | 952 711 610 |
Pruner attachment with shaft | 952 711 612 |
115275126 Rev. 1 9/15/09 |