OPERATION
1.Check the product package for the rate setting, and recommended swath width. Turn the spreader off by pulling the lever to the “OFF” position as shown.
2.The rate setting is adjusted by rotating the rate cam to the desired setting. The rate cam locks at each setting.
3.Always fill the spreader on the driveway or
4.Start spreader moving, then open spreader by moving the lever to the “ON” position. Always push spreader, never pull. Pull the lever to the “OFF position to close spreader.
5.Hold handle so top of spreader is level. Tipping the spreader too far can cause uneven spreading.
6.The settings and swath widths on the product label are recommended starting points. Always check the delivery rate and pattern on a small area before treating a large area. Actual delivery rate can vary due to weather conditions, operating variables, and condition of the product being applied. See “HOW TO DETERMINE SPREADER SETTING AND SWATH WIDTH” for details.
OFF
SPREAD
SWATH
APPROX. 8 to
14 FEET ON
CENTER
7.Push spreader 2 1/2 m.p.h. (18 feet in 5 seconds) for full 8’ to 14’ spread pattern when applying fertilizer products. Apply header strips at each end of area to be treated then space trips across the area as shown.
8.Empty spreader after each use. Return leftover material to its original container.
4
