MAINTENANCE
1.Never store unused material in spreader. Return unused product to its original container.
2.Open and wash spreader thoroughly after each use and dry completely in sun or heated area.
3.Oil the axle bearings, impeller shaft bearing in hopper.
4.Remove gear cover and wash gears thoroughly. Oil all bearing areas and face of gear teeth. Re- install gear cover.
5.Gear mesh should be checked on a regular basis during high use periods. Clearance between the axle gear and pinion gear should be minimal but not tight. If adjustment is necessary, loosen axle collar set screw and hold gears together. Slide axle collar against the gear support and tighten axle collar set screw. Spin drive wheel. Gears should run freely and smoothly.
6.Impeller surface should be cleaned periodically to remove
7.Tire pressure should be
Oil
NOTES
Oil Impeller Shaft Bearing In Hopper
Oil
Axle Collar
Oil
7
