ASSEMBLY
5CONTAINER MOUNTING
1.Install containers on supports, overlapping at center supports.
2.Close cover and lock latch handles over center support tubes.
Center |
|
Support |
|
Tubes |
WARNING
DO NOT operate mower unless container is properly installed. Container is subject to wear and deterioration, check containers frequently, replace when cracked or damaged. Use only a recommended replacement container.
6LOWER CHUTE INSTALLATION
1.Raise and hold deflector shield in upright position.
2.Fit lower chute as shown and hook rear latch to mower deck.
3.Align the bracket slot on lower chute with the deflector bracket tab on the mower deck. Slide chute down over tab.
4.With the lower chute in proper position, hold the chute securely while hooking the front latch to the mower deck.
NOTE: While hooking the latches, the deflector shield may try to push the chute away from the mower deck opening. It is important to hold the chute in position while hooking the latches to the mower deck.
Deflector
Shield
Deflector
Bracket
Tab
Front Latch
Rear Latch
CAUTION
CAUTION
Before raising deflector shield, turn mower engine off. DO NOT remove deflector shield from mower. Raise and hold shield when attaching lower chute and allow it to rest on chute while in operation.
11
