UNPACKING INSTRUCTIONS | CONTAINER CONTENTS | ||||
• | Remove all parts and packing materials from | 3 | - Soft Bag Containers | 1 | - Upper Chute |
| carton. | 1 | - Lower Chute | 1 | - Catcher Hitch |
• | Check carton contents against list. Be sure all | 1 | - Cover Assembly | 1 | - Cast Weight |
| parts are there. | 1 | - Catcher Mount | Hardware | |
|
| ||||
TOOLS REQUIRED |
|
|
|
| |
• | ½" Wrench (2) |
|
|
|
|
• | 9/16" Wrench |
|
|
|
|
• | 9/16" Socket wrench |
|
|
|
|
• | Drill and 5/16" bit |
|
|
|
|
PARTS IDENTIFICATION
COVER ASSEMBLY
UPPER CHUTE
DUMP BAG INDICATOR
BAG |
CONTAINERS |
CHUTE LATCH
LOWER CHUTE
NOTE: When right hand (RH) and left hand (LH.) are mentioned in this manual, it means when seated on the mower in the operator’s position.
CAUTION
BEFORE ASSEMBLING GRASS CATCHER TO MOWER:
•Place motion control levers in “NEUTRAL” position.
•Set parking brake.
•Turn ignition key “OFF” and remove key.
•Make sure the blades and all moving parts have completely stopped.
•Disconnect spark plug and place wire where it cannot come in contact with plug.
8