assembly/CONTROLS
1.Rotate the handle and tighten it in place.
2.Fill the engine with the manufacturer- recommended oil. See section “Lubrication/ Engine oil”.
3.Test the clutch. Make sure that the clutch expansion spring disengages 6.35 mm (¼") easily.
4.The engine RPM is preset by the manufacturer. Idle speed is
See the engine manual for instructions on adjusting the regulator and carburetor if the engine speed is not within these limits.
3
2
7
4 6 
9
1 5 
8
1. | Engine Oil refill | 6. | Knob for collapsible handle |
2. | Clutch cable | 7. | Handle |
3. | Clutch bail | 8. | Shaft guard |
4. | Engine | 9. | Belt shield |
5. | Depth lever |
|
|
14
