Woods Equipment TS1680Q manual Install SMV Emblem, TS1680 Pull-Type Cutter Assembly Rear Half

Install SMV Emblem

1.Attach SMV socket (13) to deck bracket with two carriage bolts (24) and lock nuts (25).

2.Attach SMV emblem (15) to SMV bracket (14) using two round head cap screws (26) and hex nuts (27).

3.Insert SMV bracket (14) and emblem (15) into socket (13).

1.	Tailwheel arm	16.	1 x 4-1/2 Headless pin
2.	Tire & hub	17.	1/4 x 1-1/2 Cotter pin
3.	Attitude rod	18.	5/8 NC x 5 HHCS GR5
4.	Spacer	19.	5/8 NC Lock nut
5.	Transport lock-up	20.	1/2 NC x 3 HHCS GR5
6.	3-1/2 x 8 Hydraulic cylinder	21.	1/2 NC Flanged lock nut
7.	1/2 to 1/4 Reducer	22.	1" Standard flat washer
8.	Elbow with restricter	23.	1" NC Hex nut
9.	Hose	24.	5/16 NC x 3/4 Carriage bolt
10.	Ratchet adjustment link	25.	5/16 NC Flanged lock nut
11.	Stroke control kit	26.	1/4 NC x 1/2 Round head screw
13.	SMV Socket	27.	1/4 NC Nut
14.	SMV Bracket	28.	Hub
15.	SMV Emblem	29.	1/2 NF Lug nut
		30.	1/ x 5 Headless pin

Figure 28. TS1680 Pull-Type Cutter Assembly - Rear Half

(Rev. 1/25/2008) MAN0577 (6/26/2007)

Assembly 39