Stitch Selection, Triple straight stitch | Husqvarna E10 specs

STITCH SELECTION

Triple straight stitch: (1)

For reinforced seams.

Turn the stitch length dial to “S1”.

The machine sews two stitches forwards and one stitch backwards. This gives triple reinforcement.

Triple zig-zag: (2)

For hardwearing seams, hems and decorative seams. Turn the stitch length dial to “S1”.

Triple zig-zag is suitable for ﬁrm fabrics like denim, corduroy, etc.

Stitch length dial

Stitch length dial

28

Image 28

Husqvarna E10 manual Stitch Selection, Triple straight stitch, Triple zig-zag

Contents

E10 Important Safety Instructions Congratulations List of Contents Principal Parts of the Machine Page Accessories Fitting the SNAP-IN Accessory BOX Connecting the Machine to Power Source Foot controlSewing light For USA and Canada Changing the Bulb Adjust Presser Foot Pressure TWO-STEP Presser Foot Lever Attaching the Presser Foot SHANK/ Ankle Attaching the presser foot holderAttaching the presser foot Removing the presser foot Winding the Bobbin Please Note Inserting the Bobbin Inserting the Needle Threading the Upper Thread Thread Tension Bringing UP the Bobbin Thread Removing the Fabric Reverse SewingCutting the Thread Matching Needle / Fabric / Thread NEEDLE, FABRIC, Thread Selection Guide Straight stitching center needle position Straight StitchingStraight stitching right needle position Function of stitch length dial while zigzaging Zigzag StitchingStitch length dial Preparation HOW to SEW ButtonholesTo prepare the fabric Tips Blind HEM Zippers and Piping Step ZIG-ZAG Patching Triple straight stitch Stitch SelectionTriple zig-zag Maintenance Cleaning the feed dogCleaning and lubricating the hook Remove the stitch plate Trouble Shooting Guide Problem Cause Correction