Husqvarna E10 manual Maintenance, Remove the stitch plate, Cleaning the feed dog

MAINTENANCE

Attention:

Disconnect the machine from the electricity supply by removing the plug from the main socket. When cleaning the machine, it must always be disconnected from the electricity supply.

Remove the stitch plate

Turn the handwheel until the needle is fully raised. Open the hinged front cover and unscrew the needle plate screw withe the screw driver.(1)

Cleaning the feed dog

Remove the bobbin case and use the brush supplied to clean the whole area.(2)

Cleaning and lubricating the hook (3)

Remove the bobbin case. Snap the two hook retaining arms (a) outwards. Remove the hook race cover (b) and the hook (c) and clean with a soft cloth. Lubricate at the points (d) (1-2 drops) with sewing machine oil. Turn the handwheel until the hook race (e) is in the left position. Replace the hook (c). Replace the hook race cover and snap back the two hook retaining arms. Insert he bobbin case and bobbin and replace the stitch plate.

Important:

Fabric lint and threads must be removed regularly.

Your machine should be serviced at regular intervals at your local dealer.

29