Husqvarna E10 manual Connecting The Machine To Power Source, Foot control, Sewing light

CONNECTING THE MACHINE TO POWER SOURCE

Connect the machine to a power source as illustrated. (1)

A polarized plug must be used with the appropriate polarized outlet.

(2)

Attention:

Unplug power cord when machine is not in use.

Foot control

Foot control regulates the sewing speed. (3)

Attention:

Consult a qualified electrician if in doubt as to how to connect machine to power source.

Unplug power cord when machine is not in use. The appliance must be used with the foot controller:

-For USA and Canada, 110-120V: 4C-316B

-For Australia, 240V: 4C-326G

-For Europe, 220-240V: 4C-316C or 4C-326C

Sewing light

Press main switch (A) for power and light on. (“ l “)

For USA and Canada

For appliance with a polarized plug (one blade is wider than the other).

To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If it does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not modify the plug in any way.

9