Husqvarna GX560 Before any servicing to the under, side of your machine, close the, Uppermost Q

5
	Starting and Stopping
K		To Start your Lawnmower
		1.	Move the handle to the parking position (C2).
		2.	Connect the spark plug lead. (K).
		3.	Open the fuel tap (L).
		4.	Move the Choke control lever to the ‘Choke’ position
			(M) when starting from cold, and to the ‘Run’ position
			(N) when starting from hot.
		5.	Pull and firmly hold the Operator Presence Control to
			the upper handle.
		6.	Place your right foot firmly on the deck and grasp the top
			of the lower handle with your left hand. Tilt the trimmer
			towards you (P). This ensures the product is in a secure
L			position when starting and also prevents an unsightly ring
			being cut in your lawn.
		7.	Pull the starting handle gently until you feel a resist-
			ance, return the starting handle slowly.
		8.	Pull the starting handle firmly towards you to its full extent.
		9.	Allow the engine to reach its full running speed then
			gently lower the lawnmower to the ground.
		10.When the engine has warmed up make sure the
			choke control lever is in the 'Run' (N) position.
		To Stop your Lawnmower
		•	Blade continues to rotate after the machine has
			switched off, rotating blades can cause injury.
		1.	Release the Operator
			Presence Control.
M	N	2.	As the engine dies, tilt P
			the lawnmower slightly.
			This prevents a ring
			being cut in your lawn.
		3.	When the engine has
			stopped, lower the
			lawnmower to the
			ground.
		4.	Put the handle in the
			Parking position (C2).
		5.	Close the fuel tap (L)
	IMPORTANT
Q	AIR CLEANER	Before any servicing to the under-
	TIP	side of your machine, close the
		fuel tap, let the engine run until it
	THIS
		stops, disconnect the spark plug
	WAY	lead and TIP THE MACHINE ON ITS
	ONLY	SIDE WITH THE AIR CLEANER
		UPPERMOST (Q).