OPERATION

Operating instructions

By moving the levers an equal amount forward or

Roll Bar and Seat Belt

back the machine will move in a straight line in

Operate the unit with the roll bar in the raised and

that direction. FIG - 8

locked position and use seat belt. There is no

Movement of either lever forward will cause the

rollover protection when the roll bar is down. If it is

right or left wheel to rotate in a forward direction.

necessary to lower roll bar do not wear the seat

belt. Raise the roll bar as soon as clearance per-

To stop movement pull both levers into the neutral

mits.

position.

Starting and operation

To turn right while moving in a forward direction

 

pull the right lever back towards the neutral posi-

Operator must be sitting in the seat. Engage the

tion, this will slow the rotation of the right wheel

park brake, blades disengaged and the motion

and cause the machine to turn in that direction.

control levers in the neutral slots.

To turn left while moving in a forward direction pull

Set choke (if needed) turn key and release as soon

the left lever back towards the neutral position,

as engine starts. Adjust throttle to half and shut

this will slow the rotation of the left wheel and

choke off.

cause the machine to turn in that direction.

Release parking brake.

To zero turn pull one lever back beyond neutral

Close motion control levers.

while holding the other slightly ahead of neutral.

NOTE: The direction of the zero turn will be deter-

 

Engage blades and set RPM to maximum. CAU-

mined by which lever is pulled back beyond neu-

tral. Thus left lever back, left zero turn and oppo-

TION: Be sure all persons are clear of the area

site for right zero turn. Use extra care when us-

before engaging blades.

ing this maneuver the machine can spin very

 

CONTROLS

rapidly if one lever is positioned too far ahead

of the other.

Be familiar with all controls their function and how

to operate them before starting the machine.

Tracking

Motion Control Levers

Motion control levers on each side of the console control the direction of movement. The left lever controls the flow of oil from the left hydro pump to the left wheel motor. The right lever controls the flow of oil from the right hydro pump to the right wheel motor.

NOTE: To begin motion the operator must be in the seat and the parking brake disengaged before the motion control levers can be moved from the neutral slots or the engine will kill.

FIG - 8

Neutral Slot

Neutral Lock

Forward

Neutral

Front of

Mower

Reverse

Motion Control Lever Pattern

(Right Side)

The tracking knob is located in front of the left con- trol lever. Rotating this knob allows fine tuning adjustments so that the machine tracks straight with the drive levers in the full forward position.

Rotate the knob clockwise (as viewed from the operating position) to increase the speed or coun- terclockwise to decrease the speed on the left control lever. Example: If control levers are full for- ward and the unit turns to the right, turn the track- ing knob counterclockwise to decrease the speed on the left control lever.

FIG - 8

20

Page 19 Page 21
Page 20
Image 20
Husqvarna iZ5223TKAA manual Operation, Operating instructions
Page 19 Page 21

iZ5223TKAA, iZ4821KAA, iZ5223KAA, iZ5223TKOA, iZ4217TSKAA, iZ4817TSKAA, iZ6123KAA specifications

Husqvarna, a leading brand in outdoor power equipment, has a notable lineup of zero-turn mowers that combine efficiency, durability, and advanced technology. Among these, the models iZ4821KAA, iZ5223KAA, iZ5223TKOA, iZ4217TSKAA, iZ4817TSKAA, and iZ6123KAA stand out for their powerful performance and user-friendly features.

Starting with the iZ4821KAA, this zero-turn mower boasts a robust 21-horsepower Kohler engine, ensuring exceptional cutting performance. It features a 48-inch cutting deck, allowing for a wider cutting path, which is ideal for larger lawns. The innovative design of the cutting deck enhances air flow and grass lift, leading to a cleaner cut.

Next, the iZ5223KAA offers a slightly larger 52-inch cutting deck and is equipped with a 23-horsepower engine, allowing for increased mowing speed and efficiency. This model also includes an ergonomic seat and control system, providing operators with maximum comfort during extended mowing sessions.

The iZ5223TKOA model elevates the standard features of the iZ5223KAA with added versatility. It includes a specially designed mulch kit and optional bagging attachments, allowing users to customize their mowing experience based on lawn conditions. The heavy-duty frame and durable wheels of this model enhance stability, making it suitable for various terrains.

The iZ4217TSKAA is another excellent option, featuring a smaller 42-inch cutting deck that is ideal for tighter spaces. Powered by a reliable 17-horsepower engine, this mower is perfect for homeowners with medium-sized lawns. Its compact design ensures maneuverability while delivering a fantastic cut.

For those looking for power combined with maneuverability, the iZ4817TSKAA offers a dynamically balanced performance with a 48-inch cutting deck and 17-horsepower engine. It is designed to navigate around obstacles easily, making it perfect for landscaped gardens.

Finally, the iZ6123KAA represents the higher echelon of Husqvarna’s zero-turn mowers. With a powerful 23-horsepower engine coupled with a 61-inch cutting deck, it’s designed for commercial-grade performance or homeowners with expansive lawns. It features advanced technology for improved fuel efficiency while maintaining powerful cutting performance.

Overall, Husqvarna's IDs such as iZ4821KAA, iZ5223KAA, iZ5223TKOA, iZ4217TSKAA, iZ4817TSKAA, and iZ6123KAA showcase innovative features that appeal to both residential and commercial users. Their combination of powerful engines, durable construction, and user-centric design ensures a reliable mowing experience, setting a new standard in lawn care technology.
Top Page Image Contents