Specifications
∫ GENERAL
Power consumption | 11 W |
Power consumption in standby mode | |
| Approx. 0.1 W |
Power supply | AC 120 V, 60 Hz |
Dimensions (WkHkD)
570 mmk206 mmk100 mm (22 7/16qk8 1/8qk3 15/16q)
Mass (Weight) Approx. 2.7 kg (5.95 lbs)
Operating temperature range
0oC to r40 oC (r32 oF to r104 oF)
Operating humidity range
35 % to 80 % RH (no condensation)
∫AMPLIFIER SECTION
RMS Output Power Stereo mode
Front Ch (both ch driven) |
|
|
20 | W per channel (6 ≠), | |
| 1 kHz, 10 % THD | |
Total RMS Stereo mode power | 40 W | |
FTC Output Power Stereo mode |
| |
Front Ch (both ch driven) |
|
|
15 | W per channel (6 ≠), | |
20 Hz to 20 kHz, 1 % THD | ||
Total FTC Stereo mode power | 30 W |
∫SPEAKER SECTION
Type | 2 way, 2 speaker system (Bass reflex) | ||
Speaker unit(s) |
| ||
1. | Woofer |
| 8 cm (3 1/8q)k1 per channel |
2. | Tweeter |
| 2.5 cm (1q)k1 per channel |
Impedance |
| 6 ≠ | |
Output sound pressure | |||
Frequency range | 83.5 dB/W (1 m (3.3 ft)) | ||
52 Hz to 25 kHz (s16 dB), | |||
|
|
| 75 Hz to 22 kHz (s10 dB) |
∫BLUETOOTH SECTION
Version | Bluetooth® Ver.2.1 +EDR | |
Output |
| Class 2 (2.5 mW) |
Communication distance | About 10 m (33 ft)* | |
Communication method |
| 2.4 GHz band |
Correspondence profile |
| A2DP |
*Prospective communication distance Measurement environment:
Temperature 25 oC (77 oF) / Height 1 m (3.3 ft) Measure in “MODE 1”
∫TERMINALS SECTION
AUX Terminal | Stereo, ‰3.5 mm (1/8q) jack |
|
|
≥Specifications are subject to change without notice.
Mass and dimensions are approximate.
12 ≥ Total harmonic distortion is measured by a digital spectrum analyzer.
VQT4T91
Unit care
Pull out the AC power plug from the outlet before maintenance.
∫Clean this unit with a soft, dry cloth
≥ When dirt is heavy, wring a cloth moistened in water tightly to wipe the dirt, and then wipe it with a dry cloth.
≥ Never use alcohol, paint thinner or benzine to clean this unit.
≥ Before using chemically treated cloth, carefully read the instructions that came with the cloth.
∫To dispose or transfer this unit
The unit may keep the user settings information in the unit. If you discard this unit either by disposal or transfer, then follow the procedure to return all the settings to the factory presets to delete the user settings. (l 9, “To return all settings to the factory preset”)
≥The operation history may be recorded in the memory of this unit.
License
The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Panasonic Corporation is under license. Other trademarks and trade names are those of their respective owners.