2 Attach the wall mount bracket to the wall with | 5 Hook the unit securely onto the wall mount |
2 screws (not supplied). (Both sides) | brackets with both hands. |
≥Use a level to ensure both wall mount brackets are level.
At least 30 mm (1 3/16q) |
‰7.5 mm (19/64q) to |
‰9.4 mm (3/8q) |
‰4 mm |
(5/32q) |
Wall mount bracket |
≥Connect the AC power supply cord to the unit before hanging the unit onto the wall. (l 6)
≥After hanging the unit, release your hands carefully to confirm the unit sits securely on the wall.
Wall
ENGLISH
3 Fix the safety holder onto the unit with the screw (supplied).
{.Screw tightening torque: 50 N0cm (0.4 lbf0ft) to 70 N0cm (0.5 lbf0ft).
Screw (supplied)
4 Attach the fall prevention cord (not supplied) to this unit.
Cord
(not supplied)
6 Drive the safety holder fixing screw
(not supplied) to secure the safety holder onto the wall.
≥Refer to step 2 for requirements before screwing. Safety holder
Fixed to the wall
Safety holder fixing screw (not supplied)
7 Attach the fall prevention cord (not supplied) to the wall.
≥Make sure that the slack of the cord is minimal.
Screw eye (not supplied) 
Cord (not supplied)
Wall
11
VQT4T91
