Panasonic SC-NE1 Bluetooth operations, Pairing Bluetooth devices, Bluetooth transmission mode

Bluetooth® operations

By using the Bluetooth® connection, you can listen to the sound from the Bluetooth® audio device from this unit wirelessly.

≥Refer to the operating instructions of the Bluetooth® device for details.

Pairing Bluetooth® devices

Preparation

≥Turn on the Bluetooth® feature of the device and place the device near this unit.

≥If this unit is already connected to a Bluetooth® device, disconnect it.

1	Press [ , AUX] to select “BLUETOOTH”.
2	≥ If “PAIRING” is indicated on the display, go to step 3.
	Press [PLAY MENU] to select “NEW DEV.” and

then press [OK].

{.“PAIRING” is indicated on the display.

3 Select “SC-NE1” from the Bluetooth® device’s Bluetooth® menu.

4 Start play on the Bluetooth® device.

≥If prompted for the passkey, input “0000”.

≥You can register up to 8 devices with this unit. If a 9th device is paired, the device that has not been used for the longest time will be replaced.

Connecting a paired Bluetooth® device

Preparation

≥Turn on the Bluetooth® feature of the device and place the device near this unit.

≥If this unit is already connected to a Bluetooth® device, disconnect it.

Bluetooth® transmission mode

You can change the transmission speed to prioritize transmission quality or sound quality.

Preparation

≥Press [, AUX] to select “BLUETOOTH”.

≥If a Bluetooth® device is already connected, disconnect it.

1 Press [PLAY MENU] repeatedly to select “LINK MODE”.

2 Press [3, 4] to select the mode and then press [OK].

MODE 1: Emphasis on connectivity

MODE 2: Emphasis on sound quality

≥The default setting is “MODE 1”.

Bluetooth® input level

If the sound input level of the Bluetooth® transmission is too low, change the input level setting.

Preparation

≥Connect a Bluetooth® device.

1 Press [PLAY MENU] repeatedly to select “INPUT LEVEL”.

2 Press [3, 4] to select the level and then press [OK].

ENGLISH

1 Press [, AUX] to select “BLUETOOTH”.

{.“READY” is indicated on the display.

2 Select “SC-NE1” from the Bluetooth® device’s Bluetooth® menu.

{.The name of the connected device is indicated on the display for 2 seconds.

3 Start play on the Bluetooth® device.

≥This unit can only be connected to one device at a time.

≥When “BLUETOOTH” is selected as the source, this unit will automatically try and connect to the last connected Bluetooth® device.

≥The Bluetooth® device will be disconnected if “AUX” is selected as an audio source.

“LEVEL 0” ,. “LEVEL +1” ,. “LEVEL +2”

^---------------------------------------------------- J

≥Select “LEVEL 0” if the sound is distorted.

≥The default setting is “LEVEL 0”.

Disconnecting a Bluetooth® device

1 While a Bluetooth® device is connected: Press [PLAY MENU] to select “DISCONNECT?”.

2 Press [3, 4] to select “OK? YES” and then press [OK].

7

VQT4T91