Before Starting the Engine, To Operate on Hills

OPERATION

TO OPERATE MOWER (See Fig. 9)

Your tractor is equipped with an operator presence sens- ing switch. Any attempt by the operator to leave the seat with the engine running and the attachment clutch engaged will shut off the engine.

•Select desired height of cut.

•Start mower blades by engaging attachment clutch control.

•TO STOP MOWER BLADES - disengage attachment clutch control.

CAUTION: Do not operate the mower without either the entire grass catcher, on mowers so equipped, or the dis- charge guard in place.

	ATTACHMENT	ATTACHMENT LIFT LEVER
	ATTACHMENT	“ENGAGED” POSITION
	CLUTCH LEVER	“ENGAGED” POSITION
	CLUTCH LEVER
	“DISENGAGED”	LOW
	POSITION	POSITION

“ENGAGED”

POSITION

FIG. 9

TO OPERATE ON HILLS

CAUTION: Do not drive up or down hills with slopes greater than 15° and do not drive across any slope.

•Choose the slowest speed before starting up or down hills.

•Avoid stopping or changing speed on hills.

•If slowing is necessary, move throttle control lever to slower position.

•If stopping is absolutely necessary, push clutch/brake pedal quickly to brake position and engage parking brake.

•Move gearshift lever to 1st gear. Be sure you have allowed room for tractor to roll slightly as you restart movement.

•To restart movement, slowly release parking brake and clutch/brake pedal.

•Make all turns slowly.

TO TRANSPORT

•Raise attachment lift to highest position with attach- ment lift control.

•When pushing or towing your tractor, be sure gearshift lever is in neutral (N) position.

•Do not push or tow tractor at more than five (5) MPH.

NOTE: To protect hood from damage when transporting your tractor on a truck or a trailer, be sure hood is closed and secured to tractor. Use an appropriate means of tying hood to tractor (rope, cord, etc.).

BEFORE STARTING THE ENGINE

CHECK ENGINE OIL LEVEL (See Fig. 14)

•The engine in your tractor has been shipped, from the factory, already filled with summer weight oil.

•Check engine oil with tractor on level ground.

•Remove oil fill cap/dipstick and wipe clean, reinsert the dipstick and screw cap tight, wait for a few seconds, remove and read oil level. If necessary, add oil until “FULL” mark on dipstick is reached. Do not overfill.

•For cold weather operation you should change oil for easier starting (See “OIL VISCOSITY CHART” in the Customer Responsibilities section of this manual).

•To change engine oil, see the Customer Responsibili- ties section in this manual.

ADD GASOLINE

•Fill fuel tank. Use fresh, clean, regular unleaded gasoline with a minimum of 87 octane. (Use of leaded gasoline will increase carbon and lead oxide deposits and reduce valve life). Do not mix oil with gasoline. Purchase fuel in quantities that can be used within 30 days to assure fuel freshness.

IMPORTANT: WHEN OPERATING IN TEMPERATURES BELOW 32°F(0°C), USE FRESH, CLEAN WINTER GRADE GASOLINE TO HELP INSURE GOOD COLD WEATHER STARTING.

WARNING: Experience indicates that alcohol blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage. To avoid engine problems, the fuel system should be emptied before stor- age of 30 days or longer. Drain the gas tank, start the engine and let it run until the fuel lines and carburetor are empty. Use fresh fuel next season. See Storage Instruc- tions for additional information. Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

CAUTION: Fill to bottom of gas tank filler neck. Do not overfill. Wipe off any spilled oil or fuel. Do not store, spill or use gasoline near an open flame.

TO START ENGINE (See Fig. 7)

When starting the engine for the first time or if the engine has run out of fuel, it will take extra cranking time to move fuel from the tank to the engine.

LT120 specifications

The Husqvarna LT120 represents a remarkable balance of performance, durability, and user-friendly design, making it an ideal choice for homeowners looking to maintain their lawns efficiently. This riding lawn mower is engineered with a focus on comfort and functionality, ensuring that each mowing session is as productive as possible.

One of the most notable features of the LT120 is its powerful 17.5 HP Briggs & Stratton engine. This reliable engine ensures that the mower can tackle various terrains effortlessly, offering consistent power and performance even in challenging conditions. The efficient engine design also translates into lower fuel consumption, making it a cost-effective solution for lawn maintenance.

The LT120 boasts a 42-inch cutting deck, which allows for considerable coverage in a single pass. The deck is constructed from stamped steel, ensuring durability and longevity while providing a clean, precise cut. Additionally, the cutting height can be easily adjusted to six different settings, ranging from one to four inches, giving users the flexibility to achieve their desired lawn height.

For user comfort, the LT120 features an ergonomic steering wheel and a comfortable, adjustable seat. These enhancements make it easier for users to navigate their lawns for extended periods without discomfort. The mower's compact design also contributes to its maneuverability, allowing it to reach tight spaces and corners that larger models might struggle with.

Another impressive aspect of the Husqvarna LT120 is its easy-to-use hydrostatic transmission. This technology allows for smooth and seamless speed adjustments without the need for manual gear shifting. Users can simply press the pedals to change speed and direction, making the mowing experience more intuitive and less physically demanding.

Safety is paramount in the design of the LT120. It is equipped with features such as an automatic blade engagement system, which ensures that the blades only engage when the operator is seated. Additionally, the machine includes a reverse operating system that allows users to mow in reverse safely.

Overall, the Husqvarna LT120 combines power, efficiency, and comfort, making it a superb choice for residential lawn care. With its quality construction and thoughtful design features, it provides an exceptional mowing experience, helping homeowners achieve a well-maintained lawn with ease. Whether tackling small or medium-sized lawns, the LT120 ensures that lawn care is a task that can be handled with confidence and satisfaction.

Husqvarna LT120 Before Starting the Engine, To Operate on Hills, To Transport, ADD Gasoline

Models: LT120