Husqvarna LTH125 Customer Responsibilities, General Recommendations, Lubrication Chart

CUSTOMER RESPONSIBILITIES

GENERAL RECOMMENDATIONS

LUBRICATION CHART

The warranty on this tractor does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, operator must maintain tractor as instructed in this manual.

Some adjustments will need to be made periodically to properly maintain your tractor.

All adjustments in the Service and Adjustments section of this manual should be checked at least once each season.

•Once a year you should replace the spark plug, clean or replace air filter, and check blades and belts for wear. A new spark plug and clean air filter assure proper air-fuel mixture and help your engine run better and last longer.

BEFORE EACH USE

2 SPINDLE ZERK

2FRONT WHEEL BEARING ZERK

1ATTACHMENT CLUTCH

PIVOT(S)

SPINDLE ZERK 2

FRONT WHEEL 2 BEARING ZERK

ENGINE 3

•Check engine oil level.

•Check brake operation.

•Check tire pressure.

•Check for loose fasteners.

1SAE 30 OR 10W30 MOTOR OIL API

2GENERAL PURPOSE GREASE

3REFER TO CUSTOMER RESPONSIBILITIES “ENGINE” SECTION

IMPORTANT: DO NOT OIL OR GREASE THE PIVOT POINTS WHICH HAVE SPECIAL NYLON BEARINGS. VISCOUS LUBRI- CANTS WILL ATTRACT DUST AND DIRT THAT WILL SHORTEN THE LIFE OF THE SELF-LUBRICATING BEARINGS. IF YOU FEEL THEY MUST BE LUBRICATED, USE ONLY A DRY, POW- DERED GRAPHITE TYPE LUBRICANT SPARINGLY.

15