PRESENTATION

Cutting height adjustment lever

The cutting height can be adjusted to 10 different positions with the cutting height lever.

Combi-unit 25-75 mm

Seat

The seat has a jointed attachment on the front edge and can be tipped forward.

The seat can also be adjusted lengthways.

Loosen the handles under the seat and adjust it forwards or backwards to the desired position.

Fueling

The engine runs on unleaded petrol with a minimum octane rating of 85 (not mixed with oil). We recommend the use of biodegradable alkylate petrol. Do not use petrol that contains methanol.

Do not fill the tank completely, leave an expansion area of at least 2.5 cm (1“).

WARNING! Petrol is highly inflammable. ! Exercise care and refuel outdoors (see

safety instructions).

IMPORTANT!

Do not use the fuel tank as a support area.

Release lever Rider 213 C, Rider 216

The release control must be pulled out in order for the machine to be moved when the engine is shutoff. Pull the controls to the end positions, do not use an intermediate position.

Pull out the control to disengage the drive system.

Push in the control to engage to the drive system.

Release lever Rider 216 AWD

Rider 216 AWD has one control for the front axle and one control for the rear axle.

Should you attempt to drive the machine with the clutch controls pulled out it will not move. The drive on the axle is disengaged when one of the controls is pulled out.

IMPORTANT!

Always drive the machine with both clutch controls pressed in.

Clutch control, rear axle

Control drawn out, drive system disengaged.

Control depressed, drive system engaged.

Clutch control, front axle

The control is positioned on the inside of the left front wheel.

Rear control (pulled out), drive system disengaged.

Front control (pushed in), drive system engaged.

English – 13

Page 13
Image 13
Husqvarna 216 Awd manual Cutting height adjustment lever, Seat, Fueling, Release lever Rider 213 C, Rider