Maintenance
Service position for the cutting unit
The cutting head can be placed in the service position to provide easy access for cleaning, repairs and servicing. In the service position the cutting unit is raised and locked in the vertical position.
Placing in the service position
1Position the machine on flat ground. Apply and lock the parking brake. Set the cutting height control in the lowest position and lift up the cutting unit.
2 Release the clip on the front hood and lift off the fender.
3Loosen the spring on the drive belt's belt idler by pulling the spring eye.
4 Place the spring eye in the holder.
5 Lift off the drive belt and hang on the
6 Loosen on the cutting height stay and place in the holder.
7Grip the front edge of the unit and pull forwards until it stops.
8 Lift the unit until it stops and a clicking sound is heard.
9 The unit locks automatically in the vertical position.
Restoring from service position
1Grip the front edge of the unit and loosen the lock, fold down and slide in the unit.
2Replace the cutting height stay and the belt. Tension the belt with the belt adjuster.
3Fit the front cover.
4Set the cutting height control to one of the positions
English – 23
