SAFETY PRECAUTIONS

Maintenance and storage

1.Keep all nuts, bolts and screws tight to be sure the lawnmower is in safe working condition.

2.Replace worn or damaged parts for safety.

3.Only use the replacement blade and blade bolt specified for this product.

4.Never store the lawnmower with fuel in the tank inside a building where fumes can reach an open flame or spark.

5.Allow the engine to cool before storing in any enclosure.

6.To reduce fire hazard, keep the engine, silencer, battery compartment and fuel storage area free of grass, leaves or excessive grease.

7.If the fuel tank has to be drained, this should be done outdoors.

8.Be careful during adjustment of the machine to prevent entrapment of the fingers between the blade and fixed parts of the machine.

ASSEMBLY INSTRUCTIONS

1.Set the lower handlebar in place. (A)

2.Fit the lower handle ensuring that the formed

ends are located properley in corresponding slots either side of the lawnmower (B).

3.Insert the plastic plugs on both sides. (C)

4.Assemble the upper handle.

Note: washer between wing nut and handle. (D)

RECOIL STARTER

You must release the brake by pulling the blade brake lever to the handle before pulling out the cord.

1.Disconnect the spark plug lead. (H)

2.Pull the blade brake lever to release the brake on the engine. (E1)

3.Extend the pull cord fully. (E2)

4.Locate the cord in the pull cord guide positioned

on handle. (E3).

Handlebar Stop

THE 2 HANDLEBAR STOPS MUST BE FITTED BEFORE USE

1.In the packaging you will find 2 stops one marked -H-and one marked -V-.

2.To lock the handlebar in a fixed position, attach the stops as shown in the illustration (F).

3.Place -H-on the right side and -V-on the left side.

FILLING WITH OIL

1. Fill the engine with oil. A bottle of the correct amount of oil is included with the mower, SAE 30. (G)

CUTTING HEIGHT

ADJUSTING THE CUTTING HEIGHT

1.Remove the spark plug lead before adjusting.

(H)

2.Move the axles between the notches to achieve the desired cutting height. (J1) & (J2)

OIL & PETROL

Oil

1.Check oil level periodically and after every five hours of operation.

2.Add oil as necessary to keep the level to the FULL mark on the dipstick.

3.Use a good quality SAE 30 four stroke oil.

4.To fill with oil:-

a)Remove oil filler cap.

b)Fill to the FULL mark on the dipstick.

5.Change the oil after the first five hours operation and thereafter every 25 working hours.

6.Always change the oil while the engine is warm - but not hot - never attempt any maintenance on a hot engine.

Petrol

1.Use fresh regular grade lead free petrol.

2.Do not fill the fuel tank when the engine is hot.

3.Do not fill the fuel tank while smoking.

4.Do not fill the fuel tank while the engine is running.

5.To avoid introducing dirt into the fuel system, wipe all grass and dirt from the petrol filler cap before unscrewing it.

6.It is recommended that you fill the tank through a funnel with a filter.

7.Wipe away spillages before starting.

STARTING & STOPPING

1.Place the mower on a flat surface free from grit,

gravel, etc. Fill the tank with unleaded petrol, not mixed with oil. (K)

2.Do not fill with petrol while the engine is running. Any petrol spillage should be hosed away with water. Take care that water does not enter the engine.

3.Connect the spark plug lead.

PRIMER

1.Starting the cold engine

Push primer bulb firmly 3 times before starting

cold engine. (Also, if engine stopped because it ran out of fuel, refuel engine and push primer 3 times).(L)

2.Starting the warm engine

NOTE: Priming is usually unnecessary when restarting a warm engine. However, cool weather

may require priming to be repeated.

BLADE BRAKE LEVER

3.Pull the blade brake lever all the way to the upper

handle before you start the engine. The lever must be held in position to keep the engine running. (M)

4.Releasing the blade brake lever will stop the engine within 3 seconds.

5.Start the engine by pulling the starting handle firmly upwards. (N)

6.Stopping the engine

Release the blade brake lever. (M)

ENGLISH - 2

Page 5
Image 5
Husqvarna Rotary Lawnmower Assembly Instructions, Filling with OIL, Cutting Height, OIL & Petrol, Starting & Stopping

Rotary Lawnmower specifications

The Husqvarna Rotary Lawnmower represents a blend of innovation, efficiency, and ergonomic design, making it an essential tool for both residential and professional landscapers. Known for its durable build and cutting-edge technologies, it is a reliable choice for achieving a perfectly manicured lawn.

One of the main features of the Husqvarna Rotary Lawnmower is its powerful engine options, which provide ample torque and speed for various grass types and conditions. These engines offer a smooth, efficient cutting experience while minimizing fuel consumption, allowing users to extend their mowing sessions without frequent refueling.

The cutting deck of the Husqvarna Rotary Lawnmower is designed to enhance performance and efficiency. Typically constructed from corrosion-resistant materials, the deck ensures longevity while providing a clean cut. The mower's adjustable cutting height allows users to customize their mowing experience according to their lawn's specific needs, promoting healthier grass growth.

Ergonomics play a crucial role in the design of the Husqvarna Rotary Lawnmower. Features like adjustable handles, lightweight chassis, and user-friendly controls make it comfortable for operators of all sizes. Furthermore, the mower's compact design allows for easy maneuverability in tight spaces and around obstacles, enhancing overall ease of use.

Another standout characteristic is the grass collection system. Many models come with a robust grass catcher that efficiently collects clippings, reducing the need for post-mowing cleanup. Some variants even offer mulching capabilities, which finely chop the grass and redistribute nutrients back into the soil, supporting sustainable lawn care practices.

Husqvarna also incorporates advanced technologies like Smart Start, enabling reliable starting with minimal effort. The mower's low vibration technology enhances user comfort, reducing fatigue during extended use.

In summary, the Husqvarna Rotary Lawnmower combines power, durability, and innovative features to cater to the diverse needs of lawn care enthusiasts. With its robust engine, adjustable cutting height, ergonomic design, and efficient grass collection system, this lawnmower stands out as a dependable choice for anyone looking to maintain a lush, healthy lawn. Whether you are a homeowner or a professional, the Husqvarna Rotary Lawnmower provides the performance and reliability needed to tackle any mowing task with ease.