USE
Due to engine lubrication limitations, the mower should not be used on slopes in excess of 300.. (P) Before mowing objects such as twigs, toys and
stones should be removed from the lawn. (Q) Avoid running the blade over foreign objects such as
stones, roots, etc., as it may cause engine damage. Mow the lawn twice weekly during the most active periods of growth.
Never cut more than 1/3 of the length of the grass, especially during dry periods. (R)
Mow with a high cutting height setting the first time. Examine the result and lower the mower to the desired setting. Mow slowly or mow the grass twice if it is very long.
MAINTENANCE
Always remove the spark plug lead before repair, cleaning or maintenance work. All nuts, bolts and screws should be checked for tightness after 5 hours use. Check the oil. Push the handle down to ground level when tilting the mower for cleaning purposes. This will avoid oil and fuel spillage.
REGULARLY
1.Hose down or brush off all grass, leaves, etc., from the mower. (S)
2.Check the oil level.
ANNUALLY
Always handle the blade with care - sharp edges could cause injury. USE GLOVES. Renew your metal blade after 50 hours mowing or 2 years whichever is the sooner - regardless of condition. If the blade is cracked or damaged replace it with a new one.
1.Sharpening and balancing the cutter blade.
Remove the spark plug lead. Remove the cutter blade and take it to a service workshop for sharpening and balancing. When reassembling the
blade ensure that the retaining washer is flat and not dished, tighten the bolt to a torque of
2.Change the oil after each season or after 25 hours. Run the engine until warm. Remove the spark plug lead. Remove the blade to gain access to the oil drain plug, open the drain plug
underneath the mower and let the oil run out. Refit the plug and fill with new oil, SAE 30. (V)
3.The engine brake cable should always be adjusted to stop the engine within 3 sec.
CAUTION! For adjustment contact your authorized service dealer. (W)
4.Loosen screw, remove cover and take out the air filter. (X1 & X2)
5.Clean the filter with kerosene. Add
of oil, distributing evenly throughout the filter.
TRANSPORT
Remove the spark plug lead
Loosen the wire/cable from the handle before carefully folding it. Avoid damaging the wire/cable. Empty the petrol tank. The machine must be drained of oil and fuel when moving it by public transport.
CARING
At the End of the Mowing Season
1.Replace blade, bolts, nuts or screws, if necessary.
2.Clean your lawnmower thoroughly. Do not clean with chemicals, including petrol or solvents - some can destroy critical plastic parts.
3.Ask your local Service Centre to clean the air filter thoroughly and carry out any service or repairs required.
4.Drain engine of oil and petrol.
Storing your Lawnmower
1.Do not store your lawnmower immediately after use.
2.Wait until the engine has cooled to avoid a potential fire hazard.
3.Clean your lawnmower
4.Store in a cool, dry place where your lawnmower
is protected from damage.
Engine Maintenance Schedule
Follow the hourly or calendar intervals, whichever occur first. More frequent service is required when
operating in adverse conditions First 5 hours - Change oil.
Every 5 hours or daily - Check oil level. Clean
finger guard. Clean around silencer.
Every 25 hours or every season - Change oil if operating under heavy load or high ambient
temperature. Service air cleaner.
Every 50 hours or every season - Change oil.
Inspect spark arrester, if equipped.
Every 100 hours or every season - Clean cooling system*. Replace spark plug.
*Clean more often under dusty conditions, or when airborne debris is present or after
prolonged operation cutting tall, dry grass.
ENVIRONMENTAL INFORMATION
Husqvarna Outdoor Products are manufactured under an Environmental Management System (ISO 14001) using, where practical, components manufactured in the most environmentally responsible manner, according to company procedures, and with the potential for recycling at the end of the products’ life.
•Packaging is recyclable and plastic components have been labelled (where practical) for categorised recycling.
•Awareness of the environment must be considered when disposing of
•If necessary, contact your local authority for
disposal information.
DISPOSAL OF FUELS AND LUBRICATING OILS
•Wear protective clothing when handling any fuels and lubricants.
•Avoid contact with skin.
•Remove petrol and engine oil before transporting the product.
•Contact your local authority for information of your nearest Recycling/Disposal Station.
•Do NOT dispose of used fuels/oils with household waste.
•Waste fuels/oils are harmful, but can be recycled and should be disposed of through the recognised facilities.
•Do NOT dispose of used fuels/oils to water.
•Do not incinerate.
ENGLISH - 3
