ASSEMBLY
4Hang the blade with the blade flange and blade flange hub fitted on the cutting arm (blade is not shown in the figure).
•Turn the blade flange hub carefully so that it slides into one of the tracks in the pivot arm and lands in the correct position to be screwed fast.
5Press in the blade spindle into the cutting arm at the same time as the blade is rotated carefully. When the blade spindle can no longer be pressed in by hand it should be tightened using the supplied
WARNING! Exercise care when assembling
!the blade so that it does not risk becoming loose when cutting. Carelessness can result in serious personal injury or even death.
Flush cutting
Screw off the outer blade flange and mount the blade on the blade flange hub.
A=110 mm/4.33 inch, 6xM10
B=89 mm/3.5 inch, 6xM8
C=144 mm/5.7 inch
English – 11
