CONTROLS
7. By pass linkage
When pushing or pulling the mower, be sure to engage the IZT (Integraded Zeroturn Transaxle) bypass linkages. The IZT bypass linkages are located on the rear of the frame, below the rear engine guard.
•Raise the deck into the highest cutting position.
•Pull the IZT bypass linkages out and into the slots and release so that it is held in the bypass position.
•To reengage the IZT’s to drive, reverse the above procedure.
8. Fuses
The fuses are located in a holder at the right hand side of the battery compartment. They are flat pin fuses of the same type used in automobiles.
There are two fuses, as well as sockets for two spare fuses.
Fuse ratings and functions:
•20 A, Primary fuse.
•7.5 A, Mower deck coupling.
•Socket for spare fuse.
•Socket for spare fuse.
CZ10 |
1.IZT Bypass linkage Bypass linkages
1
2
CZ12
1.Head outside of rear deck
2.IZT Bypass linkage in bypass position Bypass position
Fuses |
