MAINTENANCE
•Carefully roll the belt over the top of the cutter housing pulleys.
•Remove the belt from around the electric clutch on the engine shaft.
•The belt can now be removed.
Deck belt installation
NOTE: For ease in installing the deck belt, refer to the routing decal on the front edge of the deck.
•Wrap the deck belt around the electric clutch that is located on the engine shaft.
•Push the rest of the belt through the IZT(Integraded Zeroturn Transaxle) support and up onto the deck.
•Starting on the right hand side of the deck, wrap the belt around the large right
| side idler, right cutter housing pulley, | Tension relief lever |
| small center idler, center pulley, left side |
|
| pulley and then around the large left side |
|
| idler. |
|
• | The belt will be loose at this point. |
|
• | Secure the belt tension relief lever and |
|
| reengage it in the lock bracket. |
|
