MAINTENANCE

Replacing the Air Filter

Standard air filter

If the engine seems weak or runs unevenly, the air filter may be clogged. If run with a dirty air filter, the spark plugs can obtain a coating that disrupts operation.

For this reason, it is important to replace the air filter regularly (see the heading Maintenance Schedule for the proper service interval).

Cleaning/replacing the air filter is carried out as follows:

WARNING!

Allow the exhaust system to cool before performing service. Risk for burns.

1.Remove the four plastic fasteners on the top of the air filter cowling and remove the air filter cowling.

2.Remove the paper filter cartridge.

3.Remove the foam filter (pre-cleaner). Clean the foam filter with liquid detergent and water. Squeeze dry in a clean cloth. Saturate with engine oil and squeeze it inside a clean absorbenth cloth.

4.Tap the paper filter against a fixed surface to remove dust. If the paper filter is still dirty, it must be replaced.

IMPORTANT INFORMATION

Do not used compressed air to clean the air filter.

Do not wash the paper filter. Do not oil the paper filter.

5.Wipe clean the inside of air filter housing.

6.Refit the foam filter (pre filter). The text on the filter shall face upwards.

7.Mount the paper filter in the air filter housing.

8.Replace the cowling over the air filter housing. Do not over tighten the plastic fasteners.

8011-725

Remove the air filter cowling

8011-726

Remove the paper filter cartridge

8011-727

Remove the filter

8009-728

Remove dust

English-41

Page 43
Image 43
Husqvarna Z4818BIA/968999250 manual Replacing the Air Filter, Standard air filter