LUBRICATION
6. Changing the Oil Filter
1. Drain the engine oil in accordance with the work description under the heading Engine Oil/Change Engine Oil.
2.Remove the oil filter. If necessary, use a
filter remover.
3. Wipe new, clean engine oil onto the seal for the new filter.
4.Mount the filter by hand with + 3/4 turn.
5. Run the engine warm, then check that |
|
there are no leaks around the oil filter | |
seal. | Changing the oil filter |
6.Check the oil level in the engine, fill if necessary. The oil filter holds 0.1 qt (0.1 liters) of oil.
Transmission
The transmission is maintenance free. There is no need for level checks or oil changes. If a leak occurs, replace the unit or contact your Husqvarna dealer.
