ASSEMBLY
1UTILITY BOX AND REAR GUARD REMOVAL
NOTE: Before mounting new bagger, the utility box and rear guard must be removed.
1.Remove the hairpins and clevis pins that secure the utility box to the unit (all four corners).
2.Using a ½" wrench, remove the bolts that secure the rear bracket to the unit.
Remove Bolts
Rear Bracket
2INSTALL REAR GUARD, PLATE AND HANGER
1.Using bolts removed from rear bracket, install rear guard included in kit.
2.Place the hanger over the tab on the plate.
3.Attach support plate to the front and rear brackets with four 3/8 x ¾ bolts and nuts provided with kit.
Support Plate
Front
Bracket
Hanger
New Rear Bracket
4.Secure the hanger to the rear bracket with 5/16 x ¾ bolt from kit.
Hanger Bolt
8
