Page 14

PROTOCOL™

P/N 374511B

 

CONFIG MENU (continued)

 

6- AUX SENSORS

Press 6 on the Keypad to enter the Auxiliary Sensors Submenu.

AUXILIARY SENSORS provide six temperature inputs—analog or digital.

Analog for thermistors

Digital for thermostats.

ANALOG SETTING

ANALOG accommodates temperature readings between – 40 and + 120˚F. Set on ANALOG, an unused input will produce a – 40.

DIGITAL SETTING

When set on DIGITAL the read out will be either OPEN (not in use) or CLOSED.

Use the key to toggle between ANALOG and

DIGITAL.

Using the ENT key, move down the selections.

Press CLR. Key in your selection and press ENT. The cursor will move down to the next sensor.

Press ESC to return to AUXILIARY SENSORS MENU.

Press ESC again to return to SENSOR SETUP MENU.

Press ESC again to return to CONFIG MENU.

Hand Held Device

SENSOR SETUP MENU

1-TEMP #4

2-TEMP #5

3-TEMP #6

4-TEMP #7

5-TEMP #8

6-AUX SENSORS

AUXILIARY SENSORS

1-AUX SENSOR #1

2-AUX SENSOR #2

3-AUX SENSOR #3

4-AUX SENSOR #4

5-AUX SENSOR #5

6-AUX SENSOR #6

MORE ON NEXT PAGE

AUXILIARY SENSORS

1-AUX SENSOR #7

2-AUX SENSOR #8

3-AUX SENSOR #9

4-AUX SENSOR #10

5-AUX SENSOR #11

6-AUX SENSOR #12

AUX

SENSOR #1

 

MODE

–

DIGITAL

NAME –

 

 

 

TERM. SP

–

CLOSED

HI ALARM

–

0

F

LO ALARM

–

-40

F

ALARM

–

ENABLED

 

 

 

 

Note: Aux Sensors 7 through 12 are available only on Expansion Module.

HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 (Printed in U.S.A.)

970307