Hyundai Q421S, Q421H, Q501 HYUNDAI Digital PDP TV, Connection Method, How to Watch, Connections

HYUNDAI Digital PDP TV

How to Watch Both Analog and Digital Broadcasts with Two Antennas

Connection Method

Connect an analog antenna to ANT 1 terminal for analog source and a digital antenna to ANT 2 terminal for digital source. Please ensure to connect an antenna to a correct terminal. (If you connect an analog antenna cable to ANT 2, you cannot watch TV program.)

Digital TV antenna cable

Analog TV antenna cable

- When inserting a 75 ohm coaxial cable into the input connection, ensure the wire tip not to bend.

- If you experience poor signal reception, we recommend you purchase a signal amplifier for better picture quality.

How to Watch

1	Turn on TV to activate Auto Channel (See page 47) to memorize the available channels.
2	Press	INPUT on remote control.
3	Press	to move to Analog TV or Digital TV and press		to select.
4	Press	button or	button to select the desired channels.
	Ex.) When you want to watch cable channel number 120, press			+	+
	the digit buttons.

While watching analog broadcast, you can switch an analog signal to a digital signal by pressing the button.

CONNECTIONS

18