Hyundai Q501 HYUNDAI Digital PDP TV, How to Watch, Connections, This HDMI connector is Type A

HYUNDAI Digital PDP TV

Compatible sampling freguency of AUDIO signal through HDMI (L.PCM) : 48kHz / 44.1kHz / 32 kHz

Notes:

•This HDMI connector is Type A.

•If you connect an equipment without a digital output terminal, connect to the COMPONENT VIDEO, S VIDEO or VIDEO input terminal on the TV so you can enjoy an analog signal.

•The DIGITAL IN terminal can only be used with 1080i, 480i or 480p picture signals. Set the Digital Set -Top - BoxDIGITAL OUT terminal Output setting to 1080i, 480i or 480p. For detailed information, refer to the Digital Set -Top -Box instruction manual. If you cannot display the picture because your Digital Set -Top -Box does not have aDIGITAL OUT terminal Output setting, use the component Video Input (or the S Video Input or Video Input). In thiscase the picture will be displayed as an analog signal.

How to Watch

1	Turn on TV and Press	on remote control.
2	Press up/down button to move HDMI and press		to select .

- *1 HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMILicensing LLC.

-*2 EIA/CEA-861/861B profiles compliance covers profiles for transmission of uncompressed digital video includinghigh bandwidth digital content protection.

-*3 HDMI-DVI conversion cable (TY-SCHO3DH): available on Panasonic Website (www.panasonic.com). Consult yourconsumer electronics dealer for availability details.

CONNECTIONS

26