7 |
Troubleshooting
What you see | Suggested Actions |
Screen is blank and power indictor is off
Ensure that the power cord is firmly connected and the LCD monitor is on.
“VIDEO MODE NOT SUPPORTED” message
�Check the maximum resolution and the frequency of the video adaptor.
�Compare these values with the data in the Display Modes Timing Chart.
“NO SIGNAL” message | �Ensure that the signal cable is firmly connected to the PC |
| or video sources. |
| �Ensure that the PC or video sources are turned on. |
|
|
Image is not stable and may appear to vibrate
�Check that the display resolution and frequency from your PC or video board is an available mode for your monitor. On your computer check : Control Panel, Display, Settings
�Note : Your monitor supports multiscan display functions within the following frequency domain:
The image is too light or too dark | �Adjust the Brightness and Contrast. | |
| �Refer to the Brightness/Contrast | |
|
| |
The image color is not good | �Adjust the Color | |
�Refer to the Color | ||
| ||
|
| |
Image is not centered on the | �Executes Auto Adjustment. | |
screen | ||
| ||
|
| |
Screen is blank and power indicator | �The monitor is using its power management system. | |
light is steady amber or blinks | �Move the computer’s mouse or press a key on the key- | |
every 0.5 or 1 seconds | board. | |
|
|
5
