Argecy Computer Corporation 248-324-1800
82
For entry and standard models, Parallel NPA Mode is set to Auto, the
factory default.
When NPA Mode is set to On, your computer can send print jobs to the
printer and query printer status information simultaneously:
• Press the operator panel button with a brief button press to scroll
through the settings (Off, On, Auto). Press the operator panel button
with a long button press to select and save the On setting. As the
setting is saved, all operator panel lights remain on for approximately 2
seconds.
• Press the operator panel button with a double button press to scroll to
the next menu item, Parallel Protocol.
Turn off the printer to exit the advanced troubleshooting mode.
For entry and standard models, Parallel Protocol is set to Fastbytes, the
factory default.
When the protocol is set to Fastbytes, the printer receives information at a
much faster transmission rate, provided the host computer supports
Fastbytes.
When the protocol is set to Standard, the printer receives transmission at
a normal transmission rate.
• Press the operator panel button with a brief button press to scroll
through the settings (Fastbytes, Standard). To change the setting to
Standard, press the operator panel button with a long button press to
select and save the Standard setting. As the setting is saved, all
operator panel lights remain on for approximately 2 seconds.
• To scroll to the next menu item, Parallel Mode 1, press the operator
panel button with a double button press.
Turn off the printer to exit the advanced troubleshooting mode.
This light sequence in
advanced troubleshooting
mode: Corresponds to this setting: