Argecy Computer Corporation 248-324-1800
86
Auto CRLF/LFCR is set to Off, the factory default.
How the printer formats the end of a line depends on the computer system
being used. Use this setting to select whether or not the printer
automatically performs a carriage return (CR) after a line feed (LF) or a
line feed after a carriage return.
• If the Press Button light is off, Auto CR after LF is Off and Auto LF after
CR is Off.
• If the Press Button light is on, Auto CR after LF is On and Auto LF after
CR is Off.
• If the Press Button light is blinking, Auto CR after LF is Off and Auto LF
after CR is On.
• Press the operator panel button with a brief button press to scroll
through the settings.
• Press the operator panel button with a double button press to scroll to
the next menu item, Parallel Mode 1.
Turn off the printer to exit the advanced troubleshooting mode.
This light sequence in
advanced troubleshooting
mode: Corresponds to this setting: