SET_Block_Decompose CCA Release 2.54
Required Commands
The SET_Block_Decompose verb requires the SET Block Decompose command
(command offset X'010C') to be enabled in the hardware.
Two additional commands are used when encrypting PIN data with this verb.
When using an IPINENC type key, the verb requires the
SET_PIN_encrypt_IPINENC command (command offset X'0121') to be
enabled in the hardware.
When using an OPINENC type key, the verb requires the
SET_PIN_encrypt_OPINENC command (command offset X'0122') to be
enabled in the hardware.
8-74 IBM 4758 CCA Basic Services, Release 2.54, February 2005