IBM 3270 manual Running the Diagnostic Utility, Note to Windows NT Users, only

Running the Diagnostic Utility

Note to Windows NT Users

If your PC operating system is Windows NT, you must ru setup utility prior to running the diagnosticThis note doesutility. not apply to Windows 95 or Windows Windows98 usersNT.

users run the setup utility as follows:

1. Logon to the PC running Windows NT.

2. Insert the	3270	PCI CD-ROM	into	the CD-ROM drive.
3. SelectDiagnostic	Setup for	Windows NT	only	from the
CD-ROM menu.

1. Make sure the PCI card is connected to an active

2. Start the PC operating system.

3. Make sure no other application is accessing the 3270

4. Insert the 3270 PCI CD-ROM into the drive.

12 3270 Emulation PCI Adapter User’s Guide