IBM 4J manual Srcf=/path/file name, Date day , hhmmss ampm

Parameter	Description	Value
snode	Locate the statistics file	remote node specification generic (list)
	record by the secondary	remote node specification—Identifies a specific
	node name. This
	parameter can be used to	remote node name.
	specify a specific remote	generic—Specifies a nonspecific value for the
	node, a generic value for
		remote node name. This generic value,
	matching remote node
		containing pattern-matching characters, evaluates
	names (using pattern
		to a list of zero or more remote node names.
	matching), or a list of
	multiple remote node	list—Specifies a list of remote node specifications.
	names.
		Enclose the list in parentheses, and separate each
	The secondary node name	value with a comma.
	typically contains the
	1–16 character remote
	Sterling Connect:Direct
	node name, but can be
	any string up to 256
	alphanumeric characters
	long. You can also specify
	a remote node name as
	an IP address or
	hostname and a port
	number.
srcfile	Selects statistics based on	srcf=/path/file name
	a source file name. This	For example:
	parameter can be
	abbreviated as srcf.	sel stat srcf=/sci/accounting/june.payroll;
		This parameter can be used in combination with
		the destfile parameter to select statistics based on
		a source file name and a destination file name,
		for example:
		sel stat srcf=/sci/accounting/june.payroll
		dest=/sci/payroll/june.payroll
startt	Selects records produced	[date day] [, hh:mm:ss [ampm]]
	both at and since the	date—Specifies the day (dd), month (mm), and
	specified time. The date
	or day and time are	year (yy), which you can code as mm/dd/yyyy
	positional. If you do not	or mm-dd-yyyy. If you only specify date, the
	specify date or day, a	time defaults to 00:00:00. The current date is the
	comma must precede	default.
	time.	day—Specifies the day of the week. Values are
		today, monday, tuesday, wednesday, thursday,
		friday, saturday, and sunday.
		hh:mm:ss [am pm]—Specifies the time of day
		in hours (hh), minutes (mm), and seconds (ss).
		You can specify the hour in either 12- or 24-hour
		format. If you use 12-hour format, then you must
		specify am or pm. The default is the 24-hour
		format. The default value is 00:00:00, which
		indicates midnight. If you specify only the day
		value, the time defaults to 00:00:00.

Chapter 1. Controlling and Monitoring Processes 31