IBM 73P3315 Loading a disc, Using the drive, Using single-sided and double-sided DVD-RAM media

Loading a disc

1.Press the Eject button. The tray slides out of the drive.

2.Place a disc with the label facing up in the tray.

3.Close the tray by gently pushing the tray in until it latches.

Attention: Do not use force or insert foreign objects to open the tray. If your tray does not open when you press the Eject button, see “Manually ejecting a disc” on page 2-4for more information.

Using the drive

This section contains information on using the Multi-Burner.

Using single-sided and double-sided DVD-RAM media

DVD-RAM media is available in single-sided and double-sided versions.

The 2.6 GB and 4.7 GB versions are single-sided. The 9.4 GB versions are double-sided. To access the data on both sides of the media, you must remove the media from the drive, turn it over, and re-insert it into the drive.

Removing the disc from the cartridge

2a

3a

DVD-RAM media is available in bare-disc or cartridge form. To use cartridge media in your Multi-Burner, you must first remove the disc from the cartridge.

1. Using the tip of a ball point pen, push and break the lock pin tab .

Chapter 2. Using the Multi-Burner Plus drive 2-3