IBM 73P3315 manual Enabling the DMA setting, For Windows XP, Click the Advanced Settings tab

To use UDF formatted DVD-RAM, DVD-RW, DVD+RW, or CD-RW media in other computers, a UDF reader is included on the User’s Guide and Software Super CD. To use the UDF reader, follow this procedure:

1.Insert the User’s Guide and Software Super CD into the CD or DVD drive of the computer you want to use the UDF formatted discs with.

2.Click Start.

3.Click Run.

4.Type e:\UDF\language where e is the drive letter of the CD or DVD drive, and language is your language.

5.Click OK.

6.Double-click SETUP.EXE and follow the on-screen instructions.

Note: The UDF reader is only needed on systems that do not have another DLA program for CD-RW, DVD+RW, or DVD-RW installed.

Enabling the DMA setting

This section explains enabling the DMA setting with Windows 2000 and Windows XP.

For Windows 2000

1.Click Start, move the cursor to Settings, and click Control Panel.

2.Double-click System.

3.Click the Hardware tab.

4.Click the Device Manager button.

5.Click IDE ATA/ATAPI controller to pull down the submenu.

6.Double-click Secondary IDE. (Double-click Primary IDE if you are using the ThinkPad A21e computer.)

7.Select the DMA is available as the Transfer Mode.

8.Click OK.

9.Click Close to close System Properties window. A message is displayed, informing you that the system settings have changed.

10.Click OK to restart the system.

For Windows XP

1.Click Start, move the cursor to My Computer, and click on it.

2.Click on View system information under System Tasks.

3.Click the Hardware tab.

4.Click the Device Manager button.

5.Click IDE ATA/ATAPI controller to pull down the submenu.

6.Double-click Secondary IDE. (Double-click Primary IDE if you are using the ThinkPad A21e computer.)

7.Click the Advanced Settings tab.

8.Select DMA if available as the Transfer Mode.

9.Click OK.

10.Click Close to close the System Properties window.

2-6IBM ThinkPad Multi-Burner Plus Ultrabay Enhanced Drive: User’s Guide