IBM 770Z setup guide Ÿ Updated Diskette Factory

ŸUpdated Diskette Factory

Because of	the new	function	in	the	Software Selections CD, the Diskette Factory	no longer
all device	drivers.	You can	see	the	supported software listed in the Diskette	Factory m

ŸNew diskette name

The diskette name in the description of the PersonalizationUser's ReferenceEditorhasin the

changed fromUtility Diskette fortoPersonalizationDOSData Update. Diskette

ŸThe Recovery CD

The Recovery CD	is a startable CD-ROM	and is not shipped with	a boot diskette. The des
about using the	Recovery CD with the	bootUser'disketteReferenceinno thelonger	applies.

Ÿ Asset ID icon

The “Config” menu of Easy-Setup includes

an

Asset

ID), foricon a (new

radio-frequency

ID

option

that

is

supported

in

specified

models. More

details

are

provided

in

the

option's

u

Ÿ Docking your computer to a docking station

– If you use a SelectaDock I or SelectaDock II docking station, connect the power cor docking station and the AC Adapter to a SelectaBase 770 port replicator.

– If you use a SelectaDock III docking station, connect the power cord to the dockin

Ÿ Notice for using the external monitor

If you useBoth theLCD and CRT Display function, the external monitor must support the same resolution as that of your ThinkPad LCD.

If	you are using an external monitor that	does	not	support	the maximum	resolution of the
LCD	(1024 X 768 for the XGA model, or 800	X 600	for	the SVGA	Bothmodel),LCD do	not use
and	CRT Display .

Ÿ Notice for using the Compact Smart Card

Some Compact Smart Cards are too thick to be inserted into the upper PC Card slot of you computer. Insert the card into the lower slot.

ŸSolving computer problems

Docking station problems

The following troubleshooting might apply to users who are using the docking station—SelectaDo I, II, III, or the Port Replicator with Advanced EtherJet Feature—under the Windows environment.