ESetup.fm Page 3 Friday, April 14, 2000 12:56 PM
Monitor Installation Diskette for
Windows 95 or 98 users
When you start your system after connecting the monitor, Microsoft® Windows® 95 or Windows 98 detects that you have added new hardware and selects a default setting. For best performance, install the files from the diskette supplied with your IBM monitor using the following instructions:
1.Click Start.
2.Select Settings.
3.Click Control Panel. The Control Panel window opens.
4.
5.Click the Settings tab.
6.Click Advanced Properties.
7.Click the Monitor tab.
8.Click Change.
9.Insert the diskette into the diskette drive and then click Have Disk.
10.Click OK.
11.Select your monitor type and then click OK. The files will be copied to your computer from the diskette.
12.Close all windows and remove the diskette from the diskette drive.
13.Restart the system.
Monitor Installation Diskette for Windows 2000 users
When you start your computer after connecting the monitor, Microsoft Windows 2000 Professional detects that you have added new hardware and selects a default setting. For best performance, install the files from the diskette supplied with your IBM monitor using the following instructions:
1.Click Start.
2.Select Settings.
3.Click Control Panel. The Control Panel window opens.
4.
5.Click the Settings tab.
6.Click Advanced.
7.Click the Monitor tab.
8.Click Properties.
9.Click the Driver tab, and then click Update Driver to open the Upgrade Device Driver Wizard window.
10.Click Next.
11.Verify that Display a list of the known drivers for this device so that can choose a specific driver is selected.
12.Click Next.
13.Insert the diskette into the diskette drive and click Have Disk.
14. Click OK. | 3 |
|
ENGLISH
PORTUGUESE