
L350/L350D
3.Click the OK button. If the character string you enter matches the registered password, the password option is reset and the display changes to:
Not registered
If they do not match, the following message appears. You must repeat step 1.
Incorrect Password!!!
If you enter the password incorrectly three times in a row, the computer needs to be shut off
You will not be able to access the password option in the HW Setup. In this case you must turn the power off and back on to retry the procedure.
4.Follow the same procedures described in the earlier section, How to set the password, to set a new user password.
Display
This tab allows you to customize your computer’s display settings for either the internal LCD screen or for an external monitor.
Power On Display
Allows you to set the display to be used when the computer is booted.
Selects an external monitor if one is connected, | |
| otherwise, it selects the internal LCD display |
| (Default). |
|
|
LCD + Analog RGB | Selects both the internal LCD and an external |
| monitor for simultaneous display. |
|
|
CPU
Dynamic CPU Frequency Mode.
This option allows you to choose from the following settings:
Dynamically | CPU power consumption and clock speed |
Switchable | automatic switching function is enabled. When |
| the computer is in use, CPU operation is |
| automatically switched when necessary. |
| (Default) |
|
|
Always Low | CPU power consumption and clock speed |
| automatic switching function is disabled. The |
| CPU always runs at low power consumption and |
| low speed. |
|
|
User’s Manual |