L350/L350D

HD DVD-ROM drive

For more information, refer to Chapter 4, Operating Basics,.

Problem

Procedure

 

 

You cannot access a

Make sure the drive’s drawer is securely closed.

CD/DVD/HD DVD in the

Press gently until it clicks into place.

drive

 

Open the drawer and make sure the CD/DVD/HD

 

 

DVD is properly seated. It should lie flat with the

 

label facing up.

 

 

 

A foreign object in the drawer could block laser

 

light from reading the CD, DVD or HD DVD.

 

Make sure there is no obstruction. Remove any

 

foreign object.

 

 

 

Check whether the CD/DVD/HD DVD is dirty. If it

 

is, wipe it with a clean cloth dipped in water or a

 

neutral cleaner. See the Media care section in

 

Chapter 4, for details on cleaning.

 

 

Some CD/DVD/HD

The software or hardware configuration may be

DVDs run correctly, but

causing a problem. Make sure the hardware

others do not

configuration matches your software’s needs.

 

Check the CD/DVD/HD DVD’s documentation.

 

 

 

Check the type of CD/DVD/HD DVD you are

 

using. Refer to Chapter 1, Introduction, for more

 

information.

 

 

 

Check the region code on the DVD. It must

 

match that on the drive. Region codes are listed

 

in the Optical disc drives section in Chapter 2,

 

The Grand Tour.

 

 

User’s Manual

9-9